Required Equipment

Pump

The most important piece of equipment in your swimming pool is the pump; it is the heart of the system. The pump moves water through the drains, pipes, and other equipment in your pool. Without a pump, you cannot filter, heat, or clean your water.

Certain methods of adding chemicals also rely on the pump to distribute treatments to the pool. Water enters the pump through the main drain and the skimmer(s), and there is a basket that prevents large debris from entering it.

A pump also runs most automatic cleaners by either drawing in water or pushing it out, and it supplies power for additional water features.

Filter

A filter is the main way of removing debris from pool water. There are three types of pool filters:

• Sand
• Cartridge
• DE (Diatomaceous Earth)

Each filter has different cleaning capacities. All pools require a filter of some kind, even above-ground pools. Water should flow from your pump directly into your filter.

After entering the filter, the water either returns to your pool or goes through other equipment like heaters. Filters need to be cleaned on a consistent basis to maintain their effectiveness.

Drains and Skimmer

The main drain is the primary way that water is drawn from your pool into the pump and filter. The main drain is located on the bottom of the pool in the deepest part. Most pools have one, but larger pools may have multiple main drains.

Main drains must be protected by an approved cover. Water is also pulled into the pump through one or more skimmers, located on the waterline.

Because they are on the surface, skimmers use baskets to catch floating debris like leaves. Some models have a weir door that helps collect debris and prevent it from returning to the pool. Skimmers and main drains use PVC pipe to carry water to the pump.

Return Lines

Return lines take water that has been filtered—and in some cases heated or chemically treated—and push it back into the pool. These lines have inlets or jets located around the top of the pool.

Some inlets allow you to control the direction of water flow. Return lines can also supply water to waterfalls or other pool features.

In some cases, return lines are plumbed into the pool floor, creating a cleaning system that pushes debris toward the main drain.

Vacuum

Every pool needs a vacuum to clean debris that settles on the bottom. Whether you have a manual suction-side vacuum or an automatic cleaner, this equipment is essential.

Some cleaners use suction, while others use pressure. Certain cleaner models require a dedicated booster pump. Robotic cleaners have their own suction systems and run on electricity independent of your pool pump.

WHY DO I NEED REGULAR WEEKLY POOL SERVICE AND CLEANING WHEN MY POOL STAYS FAIRLY CLEAN?

During warmer weather with higher swim loads, chlorine is reduced quickly. Regular servicing and maintenance including brushing and vacuuming is required to keep algae at bay. Always remember that when a pool looks clear it does not mean that it is necessarily clean and fit for swimming.

IS THERE A SIMPLE FORMULA FOR ADDING CHEMICALS TO MY POOL?

No, there is no simple formula for adding chemicals to your pool. There are various factors including: physical, chemical, biological, and environmental. Each pool is unique and requires a different amount of chemicals.

WHY AM I USING MORE CHEMICALS THAN LAST MONTH?

If pool usage increases or if the pool water temperature rises, this can effect chemical usage and could be one of many reasons why you are using more chemicals than last month. Other common factors include weather, and many other physical and environmental factors that effect chemical usage.

WHY CAN'T THE SERVICE TECHNICIAN CLEAR MY POOL IN ONE VISIT?

Depending on why the pool is not clear it may take a few days. If you have metals and phosphates you have to treat each cause separately. Remember, just because a pool looks clear, that does not mean that it does not need ongoing maintenance and service.

WHY IS MY POOL GREEN?

Your pool may be green from a number of factors. These may include algae growth from phosphates or metals in the water.

CAN I PROVIDE MY OWN POOL CHEMICALS?

Yes, but they would need to be the correct type of chemicals, stored properly in a secure area that our technicians have access to. It is important to note that the quality of pool chemicals varies. If you are using your own chemicals we cannot guarantee water clarity.

Hygiene and Accident Prevention

These swim diapers are designed with a snug fit and an inner mesh lining to effectively contain solid waste. This helps prevent accidents in public or private pools and reduces the risk of spreading bacteria.

Economical and Reusable

Unlike disposable swim diapers, these diapers can be washed and reused multiple times. This makes them a cost-effective choice while also helping to reduce environmental waste.

Comfort and Design

• Made from lightweight, non-absorbent material (similar to a swimsuit), so they do not swell or sag in water, allowing children to move freely and comfortably.
• The soft, dark inner mesh lining helps hide any potential stains.

Adjustability and Longevity

These diapers feature adjustable snap settings, allowing them to fit a wide weight range (approximately 10–40 lbs). This means they grow with your child through different stages of development.

Building Water Confidence

By providing secure and reliable coverage, these swim diapers give parents peace of mind. This allows them to focus on helping their little ones build confidence and fully enjoy their time in the water.

1. “Talk to a Pool Designer”

This CTA works well because it is direct and easy to understand. However, there are two important elements missing that should be included in every effective call-to-action:

• Power words (e.g., today, right now, free)
• Time sensitivity (e.g., don’t miss out, limited availability, running out)

Power words are persuasive and create an emotional response in your audience. These influential words and phrases are proven conversion boosters and can make the difference between someone choosing your company for their new pool build or leaving to explore a competitor’s website.

It is also important that your CTA creates a sense of urgency. The longer visitors delay taking action, the less likely they are to convert.

2. “Start Designing Now!”

This CTA checks off the boxes that the previous one missed. It includes both time sensitivity and a strong power word.

However, it lacks visualization cues. It doesn’t fully paint a picture of what designing a backyard pool and spa with your company looks like.

To improve effectiveness, this CTA should be supported by content that explains the design process and helps users visualize their future outdoor space.

3. “Build Your Dream Pool Today”

This CTA was the highest-ranking call-to-action for pool and spa companies, according to Collective INDB’s research. It ranks highly for readability and includes:

• Action-oriented language
• Power words
• Strong visualization that encourages users to imagine their ideal outdoor oasis

It inspires visitors to picture what building their perfect pool and spa could look like, making it highly effective at driving conversions.

Enhancing the Experience with Visualization Tools

Pool Marketing Site’s MyStaycation Builder gives visitors the ultimate opportunity to design the backyard of their dreams. Using an easy-to-use drag-and-drop interface, users can:

• Create stunning backyard designs
• Save their custom projects
• Share project ideas directly with your pool sales team

This interactive experience not only boosts engagement but also helps move prospects further down the sales funnel with confidence.